Section 2
Amplifier Unit
(6) TEACH (teaching input)
There are two teaching modes, workpiece stop teaching and workpiece move
teaching. These teaching modes can be selected in the menu.
Selecting the teaching mode from an external device
(7) TRIG (measurement trigger input)
There are two measurement modes, synchronous measurement and continuous
measurement. Which mode of measurement is to be performed in is selected in the
menu.
Selecting the measurement timing
(8) BANK1 (bank switching input 1)
(9) BANK2 (bank switching input 2)
(10) BANK3 (bank switching input 3)
About bank switching
Timing charts
■ I/O Circuit Diagrams
●
NPN output type (ZFV-A10/A20)
ZFV
32
User's Manual
p.59
p.34
Brown
Power supply (24VDC)
Black
OUTPUT
Orange
ENABLE
Light blue
ERROR
Blue
GND(0V)
Yellow
TEACH
Pink
TRIG
Gray
BANK1
Green
BANK2
Red
BANK3
p.59
Load
Load
Load
24VDC