Customizing Measurement conditions
■ Reversing black-and-white images
Reverse the currently displayed binary image.
As white pixels are targeted for measurement, select which part of the measured area
is to be set to white pixels.
WHITE (default value)
■ Changing the binarization level
Set the level for converting 256-tone contrast image captured from Sensor Head to a
0 to 255
Select which part of the measurement area is to be set as white pixels.
As white pixels are targeted for measurement, adjust the binarization level so
that the measurement area is converted to white pixels.
LEFT/RIGHT keys: Select upper limit/lower limit.