Omron ZFV Series User Manual page 89

Section 4
Specifications and External Dimensions
Item
Output method
Inspection items
Teaching area
Teaching area size
Sensing area
Resolution
Bank selection
Response time
Other functions
Output signals
Input signals
Sensor Head interface
Image display
Indicators
Operation interface
Power supply voltage
Current consumption
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Ambient atmosphere
Degree of protection
Materials
Weight
Accessories
ZFV
86
User's Manual
Single-function Models
ZFV-A10 ZFV-A15
NPN PNP
Pattern (PTRN), Brightness (BRGT)
Rectangular, one area
• Pattern (PTRN), Brightness (BRGT): Any rectangular area (256 × 256 max.)
• Area (AREA), Width (WID), Position (POSI), Count (CNT), Characters (CHAR):
Any rectangular area (full screen max.)
Full screen
468 × 432 (H × V) max.
Supported for 8 banks.
Pattern (PTRN), Brightness (BRGT): High-speed: 4 ms, Standard: 8 ms,
High-precision: 12 ms (not using partial scan)
Area (AREA), Width (WID), Position (POSI), Count (CNT),
Characters (CHAR): 128 × 128: 15 ms max.
Control output switching: ON for OK or ON for NG
ON delay/OFF delay, One-shot output, "ECO" mode
(1) Control output (OUTPUT), (2) Enable output (ENABLE),
(3) Error output (ERROR)
(1) Simultaneous measurement input (TRIG) or Continuous measurement input
(TRIG), Switched by using menu.
(2) Bank selection inputs (BANK1 to BANK3)
(3) Workpiece still teaching (TEACH) or Workpiece moving teaching (TEACH),
Switched by using menu.
Digital interface
Compact TFT 1.8-inch LCD (Display dots: 557 × 234)
• Judgement result indicator (OUTPUT) • Inspection mode indicator (RUN)
• Cursor keys (up, down, left, right) • Setting key (SET) • Escape key (ESC)
• Operating mode switching (slide switch) • Menu switching (slide switch)
• Teaching/Display switching key (TEACH/VIEW)
20.4 to 26.4 VDC (including ripple)
600 mA max. (with Sensor Head connected)
1,000 VAC, 50/60 Hz for 1 min between leads and Amplifier Unit case
1 kV, Pulse rise: 5 ns, Pulse width: 50 ns, Burst duration: 15 ms, Cycle: 300 ms
Destruction: 10 to 150 Hz, 0.1-mm single amplitude, 10 times each in X, Y, and Z directions for 8 min
Destruction: 150 m/s 2 , three times each in six directions (up/down, left/right, forward/backward)
Operating: 0 to 50°C
Storage: -25 to 65°C (with no icing or condensation)
Operating and storage: 35% to 85%
Must be free of corrosive gas.
IEC60529, IP20
Polycarbonate
Approx. 300 g (including cord)
Ferrite core (1), Instruction sheet
Standard Models
ZFV-A20 ZFV-A25
NPN PNP
Patterns (PTRN), Brightness (BRGT),
Area (AREA), Width (WID), Position
(POSI), Count (CNT), Characters (CHAR)