Customizing Measurement conditions
Specifying edge detection conditions
Set this when [EDGE] is selected to [MODE].
Set the direction in which edges are searched and the change in density.
• Selecting the color of edges
Select the direction of density change for the edge to be detected.
MENU Mode-[CUSTM]-[MODE DTL]-[COLOR]
BLACK (default value)
• Selecting the edge detection direction
Select the direction in which edges are searched.
MENU Mode-[CUSTM]-[MODE DTL]-[DIRECTION]
To correction position by this edge
COLOR : BLACK
A change from dark to light is judged as an edge.
A change from light to dark is judged as an edge.
Searches from bottom to top.
Searches from top to bottom.
Searches from left to right.
Searches from right to left.