Chara/Chara 1, Chara 2 - Omron ZFV Series User Manual

Section 3
Customizing Measurement conditions

CHARA/CHARA 1, CHARA 2

■ Set the model registration conditions for characters
This item is displayed only when [CHARA 2] is set.
Select the number of characters in the preset teaching area.
Select the number of characters being within a certain number of characters on one or
two lines.
Selection guidelines
MENU Mode-[CUSTM]-[MDL DIV]
Setting
1LINE SHORT
1LINE NORMAL
(default value)
1LINE LONG
2LINE SHORT
2LINE NORMAL
The number of characters in the above table are for reference only. When there are more characters
than the number of reference characters in the selected item, measurement accuracy drops.
ZFV
72
User's Manual
• 8 characters, 1 line
• 8 characters, 2 line
Select this when the character string is 6 characters or less on 1 line.
Select this when the character string is 8 characters or less on 1 line.
Select this when the character string is 15 characters or less on 1 line
Select this when the character string is 6 characters or less on 2 lines.
Select this when the character string is 8 characters or less on 2 lines.
1LINE NORMAL
2LINE NORMAL
Description