Section 3
About Setup
About Setup
Basic Knowledge for Operation
■ Switching Modes
There are 3 operating modes as follows. Switch to the desired mode before you start
operation. To switch the operating mode, use the mode switch.
Mode
MENU mode
ADJ mode
RUN mode
■ Switching Menus
There are two setup menus in the MENU mode. Switch the menu according to your
specific requirements.
To switch the menu, use the menu selector switch.
Setup Menu
STD menu
EXP menu
ZFV
44
User's Manual
This mode is for executing teaching or setting up the measurement conditions.
This mode is for setting the judgment threshold values.
This mode is for performing actual measurement.
This is the standard menu.
First, set the measurement conditions in this menu.
This is the expert menu.
Switch to this menu to make a more advanced setup.
Description
Description