Omron ZFV Series User Manual page 76

■ Select whether or not to perform Position compensation
Set Position compensation for improving detection accuracy in the following instances:
When there is a pattern in
the detection range
MENU Mode-[CUSTM]-[MODE]
Setting
NONE
MODEL
EDGE
■ Select the content of position compensation
●
Registering models
Set this when [MODEL] is selected to [MODE]
Specify the top left coordinate and bottom left coordinate of the model.
Model
MENU Mode-[CUSTM]-[MODE DTL]-[MODEL]
Customizing Measurement conditions
When printed text is out of
position
The position is not corrected.
The model is used to correct the position.
Select this when there is a characteristics part such as a corner of a text
box.
Model
The edge position is used to correct the position.
Edge
Section 3
Description
User's Manual
ZFV
73