Table of Contents
Advertisement
Using Basic Phone Functions
Using Hold and Resume
Using Hold and Resume
Using Mute
Ending a Call
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
To put a call on hold, press the Hold button. A series of beeps or music on hold
plays for the caller to indicate that the call is on hold.
To resume the call, press the flashing red line button for that call. On the
Cisco SPA502G or Cisco SPA512G, press the Resume softkey.
If you are on a call and another call comes in, press the flashing red line button or
press the Hold button to place the call on hold and answer the incoming call. To
resume the first call, press the line button for the call or select it using the Up or
Down navigation button and press the Resume softkey (Cisco SPA502G or
Cisco SPA512G).
When mute is enabled you can hear other parties on a call, but they cannot hear
you. You can use this feature on the handset, speakerphone, or headset.
•
To toggle mute on, press the Mute button. The button is lit.
•
To toggle mute off, press the lit Mute button.
To end a call:
•
Press the EndCall button.
•
If you are using the handset, hang up.
•
If you are using the speakerphone, press the Speaker button.
•
If you are using the headset, either press the Headset button (wired) or
replace the handset (wireless).
3
27
Advertisement
Table of Contents
