Table of Contents
Advertisement
Installing Your Phone
Phone Connections
STEP 1
STEP 2
!
CAUTION
STEP 3
STEP 4
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
#
Description
7
Handset port.
8
Power port. (Use only with a PA100 power adapter.)
Connecting the Handset
Turn the phone body over to expose the ports on the back of the unit.
Insert the long end of the phone cord into the RJ-11 handset port on the phone
body that is marked with a phone symbol.
Do not insert a telephone line cord into the RJ-11 AUX (auxiliary) port.
(Optional) Route the phone cord through the cable slot.
Insert the other end of the phone cord into the port at the bottom of the handset
(not shown).
Connecting the Power
The Cisco 500 Series IP phones do not ship with power supplies. If you are not
using Power over Ethernet (PoE), you must order a Cisco PA100 power supply for
each phone from Cisco.
If you are using Power over Ethernet (PoE) to power the phone, the phone receives
power when you connect an Ethernet cable from the phone SW port to a switch
that provides PoE. If you are using a Cisco PA100 power adapter, insert one end of
the power adapter into an outlet and insert the other end into the power port on
the phone body.
2
16
Advertisement
Table of Contents
