Using The Speaker Or A Headset; Using The Speaker; Sending Audio To The Phone Speaker; Choosing Your Preferred Audio Device - Cisco SPA50X User Manual

Using Basic Phone Functions

Using the Speaker or a Headset

Using the Speaker or a Headset
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
You can use the handset, headset, or speakerphone to place or receive a call. And
you can switch among these devices during a call; however, only one of these
devices at a time can be used.
When switching from the handset to the speakerphone, make sure the
speakerphone or headset light is illuminated before placing the handset back on
the hook. When switching from the handset to a wireless headset, do not replace
the handset on hook or you will disconnect the call.

Using the Speaker

To use the speakerphone, press the Speaker button (the handset can be either on
or off hook).

Sending Audio to the Phone Speaker

You can send the audio to the speaker when the handset is lifted. (Not available for
the Cisco SPA501G.)
To send the audio to the speaker when the handset is lifted:
Press the Setup button.
Select Preferences.
Choose Send Audio to Speaker > edit.
Press y/n to enable or disable the feature.
Press ok.
Press Save.

Choosing Your Preferred Audio Device

This option designates the headset, handset, or speaker as the preferred audio
device. (Not available for the Cisco SPA501G.)
3
24