Installing The Desk Stand Or Wall Mount (Optional) - Cisco SPA50X User Manual

Installing Your Phone
Connecting Your Phone to the Network
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
• Wired headsets—Connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone:

Installing the Desk Stand or Wall Mount (Optional)

The phone can be set on a flat surface, such as a desk, or mounted to a wall. This
section describes the installation of the desk stand. If you are attaching an
attendant console, attach the console before attaching the desk stand.
To mount the phone to the wall, you must use the MB100 wall mount bracket kit
(available separately). Do not attach the desk stand if you intend to mount the
phone to the wall. To mount the phone on the wall, follow the instructions included
with the wall mount.
2
19