Table of Contents
Advertisement
Installing Your Phone
Connecting Your Phone to the Network
STEP 1
STEP 2
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
Connecting a PC to Your Phone
A PC can be connected to the network through the phone. Cisco does not
recommend connecting a PC to the phone if the phone is connected to the
network wirelessly.
To connect a PC to your phone:
Connect one end of a Cat5e or higher Ethernet cable (not provided) to the RJ-45
port marked PC on the back of the phone body. See the
Connect the other end of the Ethernet cable to the Ethernet port on your PC.
Connecting a Wired or Wireless Headset
Cisco IP phones support headsets from other manufacturers. For the latest
supported models, contact your reseller. Additional information can be found at the
manufacturer websites.
Each brand and type of headset might require different steps for connection.
Consult the documentation for your particular headset for more information. In
general, to connect a headset:
•
Wireless—Connect the headset telephone cord into the telephone port on
the back of the IP Phone.
2
Figure
1.
18
Advertisement
Table of Contents
