Table of Contents
Advertisement
Using the Phone Web User Interface
Logging in to the Phone Web User Interface
Logging in to the Phone Web User Interface
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
To log into the phone web user interface:
Get the IP address of your phone:
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA514G:
a. Press the Setup button.
b. Scroll to Settings > Network Configuration.
c. Scroll to view IP Address. This is the IP address of your phone.
Cisco SPA501G:
a. Press the Setup button.
b. Enter 110, then press #. The IP address is recited.
On your PC, open a Web browser. Your PC must be on the same subnetwork as
the phone.
Enter the IP address in the browser address bar. The phone web user interface
displays.
The phone web user interface has two main options:
•
Voice—Contains information about your phone, including the following sub-
tabs:
-
Info—System, reboot history, product, status, extension, and line
information (read only).
-
System—Password and network settings.
-
Regional—Ring cadence.
-
Phone—Ring tones
-
User—Call forwarding, speed dials, call waiting, privacy settings, and
audio settings.
-
Ext 1—Time of Service (ToS) and Cost of Service (CoS).
•
Call History—Calls placed, received, and missed on your phone.
5
45
Advertisement
Table of Contents
