Using The Cisco Attendant Console - Cisco SPA50X User Manual

Getting Started

Using the Cisco Attendant Console

STEP 1
STEP 2
STEP 3
Using the Cisco Attendant Console
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
To access the phone web user interface:
Determine the IP address of the phone:
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA514G:
a. Press the Setup button.
b. Scroll to network and press select.
c. Scroll to view Current IP. This is the IP address of your phone.
Cisco SPA501G:
a. Press the Setup button.
b. Enter 110, then press #. The IP address is recited. (You can also press 9 for
help and follow the prompts.)
On a PC connected to the same subnetwork as the IP phone, open a Web browser.
Enter the IP address in the browser URL field. The phone web user interface
displays.
The Cisco Attendant Consoles are accessory consoles for the Cisco SPA500
Series IP phones. The Cisco SPA500S provides 32 three-color (red, green, and
orange) programmable line buttons, and the Cisco SPA500DS provides 30
buttons. The Cisco Attendant Console attaches to the IP phone with the
attachment arm provided. It obtains power directly from the IP phone; it does not
require a separate power supply. Two Cisco Attendant Console units can be
attached to a single IP phone to monitor a total of 64 (SPA500S) or 60 (SPA500DS)
separate lines.
Detailed information on the installation of the Cisco Attendant Consoles are
provided in the Cisco Small Business SPA500S Attendant Console Quick Start
Guide and the Cisco Small Business SPA500DS 15-Button Digital Attendant
Console for SPA500 Family Phones Quick Start Guide.
1
12