Making The Web Configuration Utility Viewable And Writable - Cisco SPA50X User Manual

Using the Phone Web User Interface

Making the Web Configuration Utility Viewable and Writable

Making the Web Configuration Utility Viewable and Writable
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
• Personal Directory—Personal address book.
• Attendant Console Status—Information about Cisco Attendant Consoles, if
installed.
To view the phone parameters by using the phone web user interface, the
configuration profile must be enabled. To make changes to any of the parameters
by using the phone web user interface, the configuration profile must be writable.
Your system administrator might have disabled the phone option to make the
phone web user interface viewable or writable.
To allow or disallow viewing of the phone web user interface:
Press the Setup button.
To display the phone web user interface on the PC, select Settings > Security
Configuration > Web Access Enabled.
To change the status of the Web Access Enabled parameter, press Edit.
If the option to edit the parameter is not displayed, press **# to display the option.
If the edit option still does not display, it might be set by your phone system
administrator such that you cannot modify this parameter.
Press Y/N to toggle the parameter and press OK to set the parameter.
To save your change, press Save.
To enable or disable modifying the configuration profile by using the phone web
user interface:
Press the Setup button.
To display the Web Server Writable option, select Settings > Security
Configuration > Web Server Writable.
5
46