Cisco SPA50X User Manual page 53

Using the Phone Web User Interface
Setting Voice Regional Parameters
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
Parameter
Confirm Tone
SIT1 Tone
SIT2 Tone
SIT3 Tone
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Description
Brief tone to notify the user that the last input
value has been accepted.
Defaults to 600@-16; 1(.25/.25/1).
Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
SIP IP phone screen. Defaults to
985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/
2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
SIP IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.274/
0/1,.274/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
SIP IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.380/
0/1,.380/0/2,.380/0/3,0/4/0)
This is an alternative to the Reorder Tone played
when an error occurs as a caller makes an
outbound call. The RSC to trigger this tone is
configurable on the SIP IP phone screen.
Defaults to 985@-16,1371@-16,1777@-16;20(.380/
0/1,.274/0/2,.380/0/3,0/4/0).
Played instead of the Dial Tone when there are
unheard messages in the caller's mailbox.
Defaults to 350@-19,440@-19;2(. 1 /. 1 /1+2);10(*/0/
1+2).
Played when all calls are forwarded.
Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/
1+2).
5
52