Printer Control Panel Menu - Xerox 6050 User Manual

5.2

Printer Control Panel Menu

The following is a list of the menus and submenus which can be accessed by pressing the
<Menu> key and placing the printer in the offline mode. When the printer enters the
offline mode, the first of two top level menus displays, that is, the [Network Port/Set]
menu. From this menu the user can define the system parameters, perform port
(communication) setup, run a test print (plot), manage job and error logs, set up
reprinting (offline plot), and display billing meter information.
The second top level menu is [Print Setup]. It is accessed from the [Network Port/Set]
item by pressing the [ ] key. This menu enables the user to define the roll and cut sheet
media sizes, types, and weights, as necessary, when new or different media is loaded in
the machine.
As a reminder, the following buttons are used to navigate the printer control panel
menus.
< > key
< > key
<
<
Displays the previous menu item or value on the same menu
level.
Displays the next menu item or value on the same menu level.
> key
Displays the lower level menu item.
> key Displays the higher level menu item.
Table items that are preceded by an asterisk [*] represent the values that can be
selected. Values which are followed by a [ ] mark lead to another, lower level, submenu
or selection; these are accessed by pressing the <
to accept the previous selection.
It is recommended that the procedures covered in this chapter be performed using Print
Services on Web.
> key, after pressing the <Set> key