Define Multi Pen - Xerox 6050 User Manual

Define Multi Pen

Sets up the line width, color, end style, and joint style pen attributes for HP-GL data for
multiple pens. The same parameters will be set for all other pen numbers within the
specified range.
Settings
The settings for this function are as follows.
Menu Item
Pen No.
Width
Color
End style
Joint style
Specifies the starting number and the ending number that cover the
range of pens that are to be set up. The pen numbers are set within
a range of 0 to 98.
Sets the line width within a range of 0 to 511, where a line width of
1 = 0.0635 mm. The actual width of the line will be n
with the line width set to n. The default setting is [2].
Text may not print cleanly if the line width is set to [1].
Sets the line color at [ BLACK ] or [ WHITE ].
The default setting is [BLACK] .
Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or
[TRIANGLE] . The default setting is [SQUARE] .
Refer to "End style" for further details.
Sets joint processing for lines to [MITER] , [ROUND] ,
[ UNJOINT ], [ BEVEL ], [ TRIANGLE ], or [ MITERED/
BEVELED ]. The default setting is [MITER] .
Refer to "Joint style" for further details.
This setting is only valid for HP-GL and HP-GL/2 EA, EP,
ER, FP, RA, RR and PE.
Description
×
0.0635,