4.2
Defining the Print Settings
The next step, after creating a logical printer, is to set up the parameters that define how
it will process print jobs. These parameters are located at the left side of the screen in the
[Print Setup] menus ([Media setting], [Input setting], [Output setting], [Transform], [Pen
setting], and [Command setting]).
1
2
3
Click an item in a [Print Setup] menu to display the available selections. The
settings for the selected item will display on the right side of the screen.
Set up each of the print settings that needs to be changed. Refer to the
parameter descriptions in this section for the available setting options.
Click the [Apply] button after selecting each parameter setting. You may have
to scroll the screen to reveal the [Apply] button.