Xerox 6050 User Manual page 239

Wide format printer
Hide thumbs Also See for 6050:
Table of Contents

Advertisement

3
Enter the password of the user logged in at Step
If the user information registered in the Xerox 6030/6050 Wide Format
matches the logged-in user password, the login acceptance message is
displayed.
Password:
230 User logged in
ftp>
The password of the user (ftpusr) is
4
Specify a logical printer (example: plt00h). Enter the logical printer
name using the cd subcommand.
A message indicating that the logical printer has been set will be displayed.
ftp> cd plt00h
250 Changed directory to "/ata0-p1/plt00h"
ftp>
5
Specify the bin subcommand for a data format.
ftp> bin
200 Type set to A, bin mode
ftp>
The ascii subcommand can be specified only for HP-GL data.
Specify the bin subcommand for HP-GL/2, HP-RTL, Versatec, TIFF, and CALS
data. The bin subcommand can also be specified for HP-GL data.
6
Enter a print file name (example: kikai_01.hp) using the send or put
subcommand.
A message indicating that the transferred port has been set will be
displayed. A message indicating the file name, and a message indicating
the transfer data volume and time depend on the client-side application.
ftp> sendplans_01.hp
200 Port set okay
150 Opening ASCII mode data connection
226 Transfer complete
local: plans_01.hp remote: plans_01.hp
17720 bytes sent in 0.14 seconds (1.2e+02 Kbytes/s)
ftp>
2
.
[
]
ftpusr
at shipping.

Advertisement

Table of Contents
loading

This manual is also suitable for:

6030

Table of Contents