Xerox 6050 User Manual page 101

Procedure
MENU
SYSTEM PARAMETER
SYSTEM PARAMETER
Job Recovery
Job Recovery
OFF
1
Press the <
PARAMETER] displayed.
2
Scroll to the item you wish to set up using the
< > and < > keys. [Set Date], [AUTO
ROLL], [SPA PAPER WIDTH], [Smoothing],
[Low power mode1], [Low power mode2],
[Sleep Mode], [Attention Light], [Print
Density], [Job Recovery], and [Net Cont. Time]
will display, in that order.. Press the <
to select the item.
3
Select the parameters using the < > and < >
*
keys, and then press the <Set> key.
An asterisk [*] will display on the right side of
the value once it is set.
The changed parameters are saved to the
system when the <Set> key is pressed. It
is not necessary to save each change
individually.
> key with [MENU]/[SYSTEM
> key