Xerox 6050 User Manual page 134

Media Mapping
Output image size
Settings
The settings for this function are as follows.
Auto Mapping
Size
(fixed)
Output
Paper
A3
Rotated 90 degrees
Menu Item
Sets whether the automatic mapping functions is to be enabled
or not.
The output paper size that best matches the output image size
will be determined automatically when this function is set to
[Enable]. The values specified in paper mapping will be
invalidated.
The value entered here is used as the input size when [Output]
has been specified.
The value entered here is used as the output size when [Media
Type] has been specified.
The paper size displayed will differ in accordance with the
[Input size] parameter set for the Media series.
Sets the size of the output image in relation to the input size
(size mapping).
The paper size selected will differ in accordance with the
[Output size] parameter set for the Media series.
Sets the size of the paper that is to be actually output in relation
to the output size when automatic mapping has been set to
[NO] (media mapping).
There are cases where the input image will be rotated for output
purposes depending on the paper size specified here.
The paper size selected will differ in accordance with the
[Media size] parameter set for the Media series.
Refer to the section on "Media Series" for further details on paper groups.
A3 Output on the A3
roll media
Paper
A3 Output on the A2
roll media
Description