Jams In The Feeder (Roll Media) - Xerox 6050 User Manual

Jams in the Feeder (Roll Media)

Media jams in the roll feeder(s) are caused by incorrect media loading methods and
defects in the media feeding mechanism. Reload the media according to the following
procedure.
Procedure
1
Open the media tray.
2
Rewind the media on the roll from which the
jam has occurred by rotating it toward you. If
the lead edge of the media is folded or damaged
in any way, cut it straight across with the cutter
or scissors.
Avoid damaging the paper.
Refer to sections "1.11 Cutting Roll
Media" and " Cutting Roll Media
Manually" for instructions on how to
cut the lead edge of the roll media.
3
Rotate the roll until the lead edge is gripped in
the roller.