Message List - Xerox 6050 User Manual

Message List

This section explains messages that may be displayed during printing using the
lpr command. These messages depend on the system because they are output
from the client workstation.
Cannot create /usr/spool/pltXXX/.seq
Status: The lpd daemon on the client failed to create a control file.
Action: Check the spool directory.
Copy file is too large
Status: The data is too large to store in the spool directory.
Action: Extend the spool directory area or attach the [-s] flag, then execute the lpr
command using a symbolic link.
XXprinter:Jobs queued, but cannot start daemon
Status: Cannot start the lpd daemon on the client.
Action: Restart the daemon by the lpr command.
XXprinter:Printer queue is disabled
Status: The queue is stopped.
Action: Restart the daemon by the lpr command.
XXprinter:Unknown printer
Status: A printer that is not registered in the system was specified.
Action: Check the printer registration in the [/etc/printcap] file.
jobXX can not dequeue
Status: Failed to delete job No.XX in the print service queue.
Action: Check by the lpq command whether the specified job has already changed
from the wait status in the queue to the processing status.