Printer Control Panel Menu (6030/6050) - Xerox 6030 User Manual

5.2

5.2 Printer Control Panel Menu (6030/6050)

Downloaded From ManualsPrinter.com Manuals
Printer Control Panel Menu (6030/6050)
The following is a list of the menus and submenus which can be accessed by
pressing the <Menu> key and placing the printer in the offline mode. When the
printer enters the offline mode, the first of two top level menus displays, that is,
the [Network Port/Set] menu. From this menu the user can define the system
parameters, perform port (communication) setup, run a test print (plot), manage
job and error logs, set up reprinting (offline plot), and display billing meter
information.
The second top level menu is [Print Setup]. It is accessed from the [Network
Port/Set] item by pressing the [ ] key. This menu enables the user to define the
roll and cut sheet media sizes, types, and weights, as necessary, when new or
different media is loaded in the machine.
As a reminder, the following buttons are used to navigate the printer control
panel menus.
< > key
< > key
< > key
<
> key
Table items that are preceded by an asterisk [*] represent the values that can be
selected. Values which are followed by a [ ] mark lead to another, lower level,
submenu or selection; these are accessed by pressing the <
pressing the <Set> key to accept the previous selection.
It is recommended that the procedures covered in this chapter be performed
using Print Services on Web.
Displays the previous menu item or value on the same
menu level.
Displays the next menu item or value on the same menu
level.
Displays the lower level menu item.
Displays the higher level menu item.
> key, after
197