Xerox 6050 User Manual page 89

SNMP
The communication parameters listed below must be set up.
SNMP
Community
String
Trap address
Transmission Port
(Send port)
Version
Permanence
(Persistence)
SNMP must be set up in Print Services on Web.
The communication parameter nomenclature on the printer control panel will
sometimes differ from the nomenclature on Print Services on Web. The Print
Service on Web nomenclature appears in bold type in the table below.
Menu Item
Sets whether or not to enable SNMP.
Sets the community String to be imbedded when the client
transmits SNMP packets.
Sets the IP address of the destinations (trap transmission
destinations) to which notifications are to be sent in the event
of an error occurring with the printer.
A maximum of 128 trap transmission destinations can be
saved.
Sets the port numbers of the trap transmission destinations.
Sets the version of the trap to be transmitted.
Sets whether the trap transmission destination information is to
be stored or not after the printer has been switched off. A
maximum of eight items can be enabled for permanence.
Description