Output Option - Xerox 6050 User Manual

Output Option

Sets up the output size. The following two judgment methods are available for output
image size.
•
Automatic (AUTO, OTHER, MIX, MIX2)
Determines the most suitable output size based on the input size and the size mapping
table. It also determines the roll media size to use based on the output size and the media
mapping table (or automatically.)
•
Specify Size
Enables the media size of the input image to be entered directly. The media size can be
selected from standard sizes and user-defined sizes.
This is usually set to [AUTO]. However, it is possible to specify the media size if the
same size will be used for all jobs.
The image will be enlarged or reduced if the input size and output media size are
different.
The image will not be enlarged or reduced if the [Auto Scale] selection has been set to
[NO] for the [Transform] function.
Refer to "Size/Media Mapping" for more information about size and media mapping.