Using The Multi-Purpose Tray (Mpt) - Xerox Phaser 6100 User Manual

Using the Multi-Purpose Tray (MPT)

The Multi-purpose Tray (MPT) is located on the right side of your
printer. It can be closed when you are not using it, making the
printer more compact.
Multi-purpose Tray (MPT)
The Multi-purpose Tray can hold several sizes and types of
paper, such as transparencies, cards and envelopes. You may
also want to use the Multi-purpose Tray for single page print jobs
on letterhead, colored paper for use as separator sheets, or
other specialty media that you do not normally keep in the paper
tray. You can load approximately 100 sheets of plain paper, 10
envelopes, 30 transparencies, 10 sheets of card stock or 10
labels at a time.
• Load only one size of paper at a time in the
Multi-purpose Tray.
• To prevent paper jams, do not add paper when there is still
paper in the Multi-purpose Tray. This also applies to other
types of specialty media.
• Paper should be loaded face down with the top edge going
into the Multi-purpose Tray first and be placed in the center of
the tray.
To load paper in the Multi-purpose Tray:
1
Lower the Multi-purpose Tray and unfold the paper support
extension as shown.
U P S
SING APER OR PECIALTY
2
2.9