Define Multi Pen
Settings
4.3 Logical Printer Print Settings
Downloaded From ManualsPrinter.com Manuals
Sets up the line width, color, end style, and joint style pen attributes for HP-GL
data for multiple pens. The same parameters will be set for all other pen
numbers within the specified range.
The settings for this function are as follows.
Menu Item
Pen No.
Specifies the starting number and the ending number that
cover the range of pens that are to be set up. The pen
numbers are set within a range of 0 to 98.
Width
Sets the line width within a range of 0 to 511, where a line
width of
1 = 0.0635 mm. The actual width of the line will be n
0.0635, with the line width set to n. The default setting is [2].
Color
Sets the line color at [BLACK] or [WHITE].
The default setting is [BLACK].
End style
Sets the end of the line to [SQUARE], [ROUND], [EXTEND]
or [TRIANGLE]. The default setting is [SQUARE].
Refer to "End style" for further details.
Joint style
Sets joint processing for lines to [MITER], [ROUND],
[UNJOINT], [BEVEL], [TRIANGLE], or [MITERED/
BEVELED]. The default setting is [MITER].
Refer to "Joint style" for further details.
Description
Text may not print cleanly if the line width is set to [1].
This setting is only valid for HP-GL and HP-GL/2 EA,
EP, ER, FP, RA, RR and PE.
×
151