How To Know When The Call Is Dropped - HP 83206A User Manual

Chapter 3, Processing Calls
Configure the Test Set to Emulate a Base Station
How to know when
the call is dropped
68
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
There are several ways the Test Set notifies you when a call has been dropped.
Any of the following situations may occur.
Connect state ends
If the Connect annunciator goes off, and the Test Set returns to the Active state,
the call has dropped or ended.
DTC is not detected
If communication fails on the Reverse DTC, a message will appear at the top of
the screen: "
No Reverse DTC is being detected, loss of Traffic
" The Test Set will return to Active state.
Channel.
Analog connection ends
If communication fails on the AVC, a message will appear at the top of the screen:
"
RF Power Loss indicates loss of Voice Channel.
return to Active state.
" The Test Set will