Table of Contents
Advertisement
Quick Links
QuickSpecs
Overview
Are you looking to reduce network congestion and improve cable management at the servers in your HP ProLiant Gen8 environment?
The HP FlexFabric 10Gb 2-port 533FLR-T Adapter is a dual-port 10GBASE-T adapter, featuring the BCM57810S 10 Gb Ethernet solution
from Broadcom in a PCIe 2.0 compliant form factor designed for HP ProLiant Gen8 rack servers. The HP 530FLR-T Adapter delivers full
line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters.
Providing high performance Ethernet connectivity, it is ideal for virtual server and cloud computing environments. It supports
enterprise class features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo
frames, PXE boot) and virtualization features (VMware NetQueue and Microsoft VMQ).
The adapter's support for HP Sea of Sensors 3D Technology enhances server performance by reducing energy consumption and
expense.
Models
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 533FLR-T FIO Adapter
Kit Contents
HP FlexFabric 10Gb 2-port 533 FLR-T Adapter
Quick install card
Product warranty statement
DA - 14616 North America — Version 2 — May 9, 2014
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
700759-B21
700760-B21
Page 1
Advertisement
Table of Contents
Related Manuals for HP FlexFabric 10Gb 2-port 533FLR-T
Summary of Contents for HP FlexFabric 10Gb 2-port 533FLR-T
- Page 1 The HP FlexFabric 10Gb 2-port 533FLR-T Adapter is a dual-port 10GBASE-T adapter, featuring the BCM57810S 10 Gb Ethernet solution from Broadcom in a PCIe 2.0 compliant form factor designed for HP ProLiant Gen8 rack servers. The HP 530FLR-T Adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters.
- Page 2 QuickSpecs HP FlexFabric 10Gb 2-port 533FLR-T Adapter Compatibility Servers ProLiant DL (rack-optimized): HP ProLiant DL160 Gen8 HP ProLiant DL360p Gen8 HP ProLiant DL380p Gen8 HP ProLiant DL385p Gen8 HP ProLiant DL560 Gen8 ProLiant SL (scalable line): HP ProLiant SL230s Gen8...
-
Page 3: Standard Features
Jumbo Frames The HP 533 FLR-T adapter supports jumbo frames (also known as extended frames), permitting up to a 9K byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a standard 1500-byte Ethernet frame. -
Page 4: Network Management
The HP 533 FLR-T Adapter by Broadcom supports Precision Time Protocol-ready (PTP). Network Adapter Teaming The HP 533 FLR-T adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, The team of adapters can work together as a single virtual adapter. - Page 5 Standard Features Server Integration The HP 533 FLR-T adapter is a validated, tested, and qualified solution that is optimized for HP ProLiant servers. HP validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HP Intelligent Provisioning and HP Systems Insight Manager that simplify network management.
-
Page 6: Service And Support
Protect your business beyond warranty with HP Care Pack Services When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care Pack services provide total care and support expertise with committed response choices designed to meet your IT and business need. - Page 7 Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request to the HP Global Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP. In case, the issue is with HP or supported third-party software product and cannot be resolved by applying known fixes, HP will contact the third-party vendor and create a problem incident on your behalf.
- Page 8 The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.
-
Page 9: Related Options
HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter 394793-B21 HP NC373T PCI-E Multifunction Gigabit Server Adapter 394791-B21 HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21 HP Ethernet 1Gb 4-port 331T Adapter 647594-B21 HP Ethernet 1Gb 2-port 332T Adapter... -
Page 10: Technical Specifications
Maximum distances for CAT6a are 100 meters (328 feet). NOTE: The HP 530T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit Ethernet over copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is recommended. - Page 11 Windows is a US registered trademark of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.