Order - HP 83206A User Manual

Order

Settings: Chng PL 0 through 10, Send MWI, and Send SMS for DTC; Chng PL 0
through 7, MAINTEN, and ALERT for AVC
Units: None.
These are the available orders that can be sent to the mobile when in the connect
state. The field name is changed to
authentication is turned on), and the choices are changed, when the mobile is not
in the connect state.
Note that the available choices in the
channel only.
See also, "Which Control Order Command Should I Use?" in the HP 8920B
Option 801 Condensed Programming Reference.
Page
Settings: This is an immediate action field. Selecting it starts the action.
Units: None.
Page is both an annunciator and a command. This command instructs the Test Set
to page the mobile identified in the
Test Set is sending the Page message.
Page
Annunciator
Page
Command
Figure 67 The Page Command and Annunciator Display (CALL CONTROL Screen)
Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
or
Cntl Order CC Order
field are valid choices for the current
Order
field. The annunciator indicates the
MS ID
(when
215