Origination - HP 83206A User Manual

Cellular adapter
Table of Contents

Advertisement

Origination

When the mobile originates a call, the Test Set automatically assigns the call to
the DTC or AVC indicated on the CALL CONTROL screen.
The number that the mobile has called is displayed.
Read about choosing the proper DVCC, slots, and channel numbers in
the proper combination of DVCC, slot, and channel number" on page
1. Verify that you have already done the following (refer to
2. Display the CALL CONTROL screen.
3. Select Data from the Data/Meas field.
4. Dial the desired phone number on the mobile station and press SEND.
5. The mobile station's phone number, ESN in decimal and hexadecimal, SCM, protocol
6. The Access annunciator will light while the Test Set signals the mobile on the assigned
7. The Connect annunciator will light if the mobile properly signals the Test Set on the
Emulate a Base Station" on page 64
Zeroed the RF Power meter to your satisfaction.
Selected the proper audio filter, if you want to test audio.
Put the Test Set in Active state.
Connected the mobile to the Test Set and turned the mobile's power on.
version, and the number called will be displayed.
voice channel.
reverse voice channel.
Chapter 3, Processing Calls
"Configure the Test Set to
):
Origination
"Choosing
84.
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tia/eia-13683206a

Table of Contents