Ms Capab; Name Size; Num Voice - HP 83206A User Manual

MS Capab

Settings: Cellular, US PCS, or Band 10
Units: None
Specify whether the mobile uses standard cellular protocol or if it is
PCS-capable. If you are testing a PCS-capable mobile in the cellular band, you
should still specify US PCS. For downbanding, specify Band 10 (see
"Downbanding" on page

Name Size

Settings: 0 through 25
Units: None
This is the number of characters in the
Num Fax
Settings: 0 through 99
Units: None
Specifies the number of fax messages that are waiting for the mobile to respond
to. This is used in the message waiting indicator (MWI) command.
Num SMS
Settings: 0 through 99
Units: None
Specifies the number of short message services (SMS) messages that are waiting
for the mobile to respond to. This is used in the message waiting indicator (MWI)
command.

Num Voice

Settings: 0 through 99
Units: None
Specifies the number of voice messages that are waiting for the mobile to respond
to. This is used in the message waiting indicator (MWI) command.
Chapter 7, Screen and Field Descriptions
Parameters of the DCCH CALL CONFIGURE II Screen
81.)
Calling Name
field that are sent.
227