Serv; Querying The Timebase Out-Of-Lock Indicator; Checking If Temperature Compensation Is Necessary - HP 83206A User Manual

Chapter 6, HP-IB Syntax Diagrams

SERV

SERV
Querying the
Timebase
Out-of-Lock
Indicator
Checking if
Temperature
Compensation is
Necessary
198
S:\HP83206A\USRGUIDE\MANUAL\hpib.fm
The following commands are used to query some of the service latches in the test
set. Not all of the latch commands are shown.
Issue the :LATCH:SEL command first, specifying the reference sense latch as
shown above. Then use the :LATCH:VAL? query to see the status of the out-of-
lock indicator. 0=locked, 1=out-of-lock.