Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
Display
Figure 65
DVCC
212
S:\HP83206A\USRGUIDE\MANUAL\ref.fm
Settings: Data, Meas (this is a toggle field)
Units: None.
This is a toggle field. When Meas has been selected, another field appears below
the
field. This new field provides a list of measurements which can
Data/Meas
be made.
Measurements available in this list are:
•
EVM 1
•
EVM 10
•
Adjacent Channel Power
•
Average Power
•
MAHO
The Data/Meas Field Display (CALL CONTROL Screen)
Settings: 1 through 255
Units: None, Integer values.
Digital Verification Color Code. This is for the DTC only. For the DVCC of the
DCCH, see
"Parameters of the DCCH CALL CONFIGURE Screen" on page
220.