Sms Contents; Sms Size - HP 83206A User Manual

Chapter 7, Screen and Field Descriptions
Parameters of the DCCH CALL CONFIGURE Screen
Sat Tol

SMS Contents

SMS Msg

SMS Size

224
S:\HP83206A\USRGUIDE\MANUAL\ref.fm
Settings: Narrow or Wide
Units: None
This sets the allowed frequency error for the mobile's supervisory audio tone
(SAT) when connecting to an AVC. The
processing a call where a large amount of noise is present with the SAT tone.
• Narrow - requires the sat tone to be within 10 Hz of the frequency specified in the
CALL CONTROL screen SAT field when connected on an AVC.
• Wide - accepts a sat tone in the range of 0 Hz to 7 kHz.
Settings: Up to 96 characters.
Units: None
This allows you to enter a custom Short Message Services (SMS) message to
transmit to the mobile. The message is sent when
CALL CONTROL screen's
characters that are transmitted is determined by the
Settings: 243 factory-defined characters.
Units: None
A 243-character message is automatically placed in this field when the SMS Type
is set to Auto. You can edit the first 96 characters if desired, but the remaining
characters cannot be changed or viewed.
The message is sent when
screen's or
Order Cntl Order
transmitted is determined by the
Settings: 1 through 243.
Units: characters (implied)
This setting defines the number of characters in the
used when an SMS message is sent. The factory-defined character string "Auto"
uses the full 243 characters allowed.
setting can be beneficial when
Wide
or
Order Cntl Order
is selected from the CALL CONTROL
Send SMS
field. The number of characters that are
field.
SMS Size
is selected from the
Send SMS
field. The number of
field.
SMS Size
field that are
SMS Contents