Handoff - HP 83206A User Manual

Handoff

See
command.
1. Verify that the Test Set is in the Connect state (
2. In the Traffic Chan Assignment section of the screen (or Voice Chan Assignment if you
3. Select Handoff from the list on the left side of the screen.
4. When the handoff is complete, the data for the new DTC or AVC will be displayed on
"Program Example" on page 149
are on an AVC), you must now set the following parameters:
Parameters for setting up a handoff
a. Enter the type of traffic channel (DTC or AVC).
b. Select the frequency band (Cellular or PCS)
c. Enter the number of the voice or traffic channel to handoff to.
d. Enter the power level that the mobile will change to.
e. Enter the slot number for the new channel if it is a DTC (or SAT if AVC).
f. Change DVCC, if desired.
the screen in the left side of the Traffic or Voice Chan Assignment area.
Chapter 3, Processing Calls
for an example of the equivalent HP-IB
"Page" on page 91
Handoff
).
83