Table of Contents
Advertisement
Virtualization/Control Software, cont'd
Edit any of these password fields as follows:
1.
2.
3.
4.
E-mail Addressee fields
The nine E-mail Addressee fields permit the administrator to identify the e-mail
addresses of the personnel to whom the Matrix 12800 e-mails notification of its
failure and repair status. The radio buttons and check boxes associated with each
address field permit the administrator to specify specific e-mail requirements for
each recipient. Figure 3-17 shows a typical e-mail from the switcher.
Miles Standish
From:
Sent:
To:
Subject:
Redundant power supply has been installed in BME 0.
Figure 3-17 — Typical Matrix 12800 e-mail
Edit these fields and controls as follows:
1.
2.
3.
4.
5.
6.
3-26
Matrix 12800 Switchers • Virtualization/Control Software
Click in the desired Password field. The pointer tool becomes a text cursor.
Edit the case-sensitive password as desired.
Press the Tab key on the keyboard or click in another field to exit the
Password field.
Click the Take button to make the password change take effect.
Matrix 12800
Thursday, May 15, 2003 10:05 AM
Miles Standish
Power supply installed
Click in the desired E-mail Addressee field. The graphic cursor becomes a text
cursor.
Edit the e-mail address as desired. Standard e-mail address conventions
(nnnnn@xxx.com) apply.
Press the Tab key on the keyboard or click the mouse in another field to exit
the e-mail addressee field.
In the square check boxes associated with each addressee, select the Matrix
12800 modules for which the addressee is to be e-mailed.
In the round radio buttons associated with each addressee, select whether the
addressee is to be e-mailed regarding failures, fixes, both, or not be notified.
The None radio button is handy for temporarily removing personnel from the
e-mail list when they are unavailable, such as on travel or vacation.
Click the Take button to make the e-mail address changes take affect.
Advertisement
Table of Contents
