To change the Scaler Mode settings:
1.
Select the Scaler Mode tab.
FIG. 103
Scaler Mode view
2.
Select the desired output(s).*
3.
Click any or all of the following:
4.
Click the appropriate Set button(s) to persist the setting(s).
* When selecting multiple outputs: either select consecutive outputs by holding down the Shift key and clicking the first
and last output or select nonconsecutive outputs by holding down the Control key and clicking on each output.
Instruction Manual – Enova DGX 8/16/32/64 Digital Media Switchers
The desired Current and Default scaler modes (for explanations of the three modes, see the previous page)
The Aspect Ratio of the display (for an explanation of the aspect ratio options, see the top of the next page)
Appendix A – DGX Configuration Software
Scaler Mode tab
175