AMX Enova DGX 8 Instruction Manual page 197

6.
For the first switch, click the source channel (input) and one or more destination channels (outputs). Select multiple
destination channels by holding down the Control key while selecting the channels.
7.
Click Assign Switch.
The input appears in the Assignment column of the Destination Channels list; the switch will execute when the
local preset is executed.
8.
Disconnect inputs* or outputs as part of the local preset by selecting either the source or destination channel and
clicking Disconnect.
The input or output appears in its corresponding Disconnected Channels list; the input or output will be
disconnected when the local preset is executed.
* Disconnecting an input will disconnect all outputs it is connected to.
9.
Repeat Steps 6, 7, and 8 for all switches and/or disconnects to be included in the preset.
Note: For information on the other buttons and preset modifications, press F1 while the Manage Local
Presets dialog box is open.
10.
After all switches for the preset have been assigned, click OK and then close the Manage Local Presets dialog box.
11.
Define additional local presets by repeating the steps.
Caution: The system must not be actively switching when loading this information onto the system.
12.
When all local presets have been defined, load the .xcl configuration file onto the system (see page 198).
If the .xcl configuration file has been previously loaded to the system and local presets are the only modifications
that have been made to the .xcl file, select Configure \ Configure Special – Virtual Matrix \ Configure All VM
Local Presets.
If the .xcl file is being loaded for the first time (assumes an automatically constructed configuration is on the CPU),
select Configure \ Configure All.
13.
From the File menu, select Save As and save an .xcl file with a new name to the PC.
(We strongly recommend making a duplicate copy every time the file is modified.)
14.
Reload the .xcl file from the CPU to the Control Panel according to the directions on page 143.
Instruction Manual – Enova DGX 8/16/32/64 Digital Media Switchers
Appendix B – Managing Configuration Files
The Assignment column shows three
switches that will be executed as part
of Preset 1:
 Input 2 to Output 5
 Input 3 to Output 6
 Input 7 to Outputs 8 and 9
The Disconnected Channels box shows
that Output 1 will be disconnected as part
of Preset 1.
197