AMX Enova DGX 8 Instruction Manual page 239

Basic DGX_SHELL Commands (continued)
power
Instruction Manual – Enova DGX 8/16/32/64 Digital Media Switchers
This command queries power subsystems. The query provides information relating to power
consumption and temperature for various components. It also includes the option to enable/disable
power (ON/OFF) on a BCPU in the system. When used to turn the power OFF on a DXLink Twisted
Pair board, the DXLink power is not provided to any connected DXLink Twisted Pair Modules or
Wallplates.
Usage: power [OFF | ON | STATUS | INFO] {MAIN | MAINx}{AUX}
{BCPU|BCPUx|BCPUx:y|BCPUx:y:z}{CENTER | CENTERx}{PPIC}{EXPIN}{EXPOUT}
Options:
ON
OFF
STATUS
INFO
Target:
MAIN
MAINx where x = 1-2
AUX
BCPU
BCPUx x = 1-32 (boardID) where x = 1-32 for Enova DGX 64; x = 1-16 for Enova DGX 32; x = 1-8
for Enova DGX 16; x = 1-4 for Enova 8
BCPUx:y y = 0-3 (channel-hardware order)
BCPUx:y:z z = 0-7 (port)
CENTER use for an Enova DGX 8/16 or to target all centers in an Enova DGX 32/64
CENTERx where x = 1-4 for an Enova DGX 32/64
PPIC
EXPIN (AIE expansion board in the input section of the enclosure)
EXPINx where x = 1-4 for an Enova DGX 64 (AIE expansion board in input section of enclosure)
EXPOUT (AIE expansion board in the output section of the enclosure)
EXPOUTx where x = 1-4 for an Enova DGX 64 (AIE expansion board in output section of enclosure)
Example for power STATUS (partial example due to length):
BCPU1: [volts] 4.97v, [amps] 1.30a, [temp] 57.2
BCPU2: [volts] 4.91v, [amps] 1.36a, [temp] 55.7
BCPU3: [volts] 4.34v, [amps] 1.21a, [temp] 62.0
BCPU4: [volts] 4.34v, [amps] 1.71a, [temp] 61.2
Appendix H – DGX_SHELL Commands
239