Hdcp Settings View - AMX Enova DGX 8 Instruction Manual

HDCP Settings View

The HDCP Settings view controls HDCP support, enabling and disabling support on specific HDMI or DVI inputs. The
default setting is for HDCP to be enabled.
To enable or disable HDCP support for an HDMI or DVI input:
1.
Select the input (or select multiple inputs) on the left.
FIG. 110
HDCP Settings view
2.
Under HDCP Support, click the desired option: Enable or Disable.
3.
Click the Set button.
4.
Repeat as necessary for additional inputs.
Note: To enable or disable HDCP support over the DXLink line, send the appropriate SEND_COMMAND
(
HDCP-<ENABLE|DISABLE>
the "Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver" or the "Instruction Manual –
DXLink™ Fiber Transmitters and Receivers."
Instruction Manual – Enova DGX 8/16/32/64 Digital Media Switchers
) to the DXLink Transmitter. For details, see the "NetLinx Programming" chapter of
Appendix A – DGX Configuration Software
Set button
Inputs available
186