Cisco 7975G Software Manual page 119

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Single Button Barge
Speed-dialing
Time-of-Day Routing
Touchscreen
illumination disabling
Transfer
Transfer - Direct
Transfer
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Description
Allows users to press a line key to Barge or cBarge into a
remote-in-use call on a shared line.
Dials a specified number that has been previously stored.
Restricts access to specified telephony features by time
period.
Allows user to disable touchscreen illumination on a
phone, which would override other rules that determine
when the touchscreen gets illuminated.
To provide this feature, you must implement the Display
URI, which includes configuring the length of time that
illumination remains disabled.
Allows users to redirect connected calls from their phones
to another number.
Transfer—The first invocation of Transfer will always
initiate a new call by using the same directory number,
after putting the active call on hold.
Direct Transfer—This transfer joins two established calls
(call is in hold or in connected state) into one call and
drops the feature initiator from the call. Direct Transfer
does not initiate a consultation call and does not put the
active call on hold.
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Device Pool Configuration"
chapter.
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Barge and Privacy"
chapter.
For more information refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones" chapter.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
"Time Period Configuration"
chapter.
Cisco Unified Communications
•
Manager System Guide,
"Time-of-Day Routing" chapter.
Refer to the Cisco Unified IP Phone
Service Application Development Notes
at the following location:
http://www.cisco.com/en/US/product
s/sw/voicesw/ps556/products_progra
mming_reference_guides_list.html
Requires no configuration.
For more information, refer to the
Cisco Unified Communications
Manager Administration Guide,
"Understanding Directory Numbers"
chapter.
5-15