Cisco 7975G Software Manual page 213

Appendix E Basic Phone Administration Steps
Procedure
Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down
list.
In the Mobility Information pane, check the Enable Mobility box.
Step 2
In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For
Step 3
example, you may want to add the user to a group that has been defined as a "Standard CCM End User
Group."
To view all configured user groups, choose User Management > User Group.
Click Save.
Step 4
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Performing Final End User Configuration Steps
E-7