Device Configuration Menu
Table 4-18
Network Configuration Menu Options (continued)
Option
LLDP-MED: SW Port
LLDP Power Priority
LLDP Asset ID
Related Topics
•
•
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
4-30
Description
Enables and disables Link Layer Discovery
Protocol Media Endpoint Discovery
(LLDP-MED) on the switch port. Use this
setting to force the phone to use a specific
discovery protocol, which should match the
protocol supported by the switch. Settings
include:
Enabled—default
•
Disabled
•
Advertises the phone's power priority to the
switch, enabling the switch to appropriately
provide power to the phones. Settings include:
Unknown—default
•
Low
•
High
•
Critical
•
Identifies the asset ID assigned to the phone for
inventory management.
Displaying a Configuration Menu, page 4-2
Network Configuration Menu, page 4-5
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
OL-15790-01