Unified Cm Configuration Menu - Cisco 7975G Software Manual

Device Configuration Menu
•
•
•
•
•
•
•
•
•
For instructions about how to access the Device Configuration menu and its sub-menus, see the
"Displaying a Configuration Menu" section on page

Unified CM Configuration Menu

The Unified CM Configuration menu contains these options:
•
•
•
•
•
These options show the Cisco Unified Communications Manager servers that are available for
processing calls from the phone, in prioritized order. To change these options, use Cisco Unified
Communications Manager Administration.
For an available Cisco Unified Communications Manager server, an option on the CallManager
Configuration menu will show the Cisco Unified Communications Manager server IP address or name
and one of the states shown in
Table 4-4
State
Active
Standby
Blank
An option may also display one of more of the designations or icons shown in
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
4-12
HTTP Configuration Menu, page 4-17
Locale Configuration Menu, page 4-18
UI Configuration Menu, page 4-19
Media Configuration Menu, page 4-20
Power Save Configuration Menu, page 4-23
Ethernet Configuration Menu, page 4-24
Security Configuration Menu, page 4-25
QoS Configuration Menu, page 4-26
Network Configuration, page 4-27
Unified CM1
Unified CM2
Unified CM3
Unified CM4
Unified CM5
Cisco Unified Communications Manager Server States
Chapter 4
4-2.
Table 4-4.
Description
Cisco Unified Communications Manager server from which the
phone is currently receiving call-processing services
Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable
No current connection to this Cisco Unified Communications
Manager server
Configuring Settings on the Cisco Unified IP Phone
Table 4-5.
OL-15790-01