Mounting The Phone To The Wall - Cisco 7975G Software Manual

Adjusting the Placement of the Cisco Unified IP Phone

Mounting the Phone to the Wall

You can mount the Cisco Unified IP Phone on the wall by using the footstand as a mounting bracket or
you can use special brackets available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must
be ordered separately from the phones.) If you attach the phone to a wall by using the standard footstand
and not the wall mount kit, you need to supply the following tools and parts:
•
•
See
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook
from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip
on which the handset catches when the phone is vertical. For an illustrated procedure, refer to Installing
the Wall Mount Kit for the Cisco Unified IP Phone.
Use care not to damage wires or pipes located inside the wall when securing screws to wall studs.
Caution
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
3-10
Screwdriver
Screws to secure the Cisco Unified IP phone to the wall
Figure 3-3 for a graphical representation of the phone parts.
Chapter 3 Setting Up the Cisco Unified IP Phone
OL-15790-01