Cisco 7975G Software Manual page 75

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the network port (labeled 10/100 SW on the
Configuration Cisco Unified IP Phone 7970, and 10/100/1000 SW on the Cisco
Unified IP Phone 7971G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the port on the
switch to the same speed/duplex as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you must change the PC Port
Configuration option to the same setting.
PC Port Speed and duplex of the access port (labeled 10/100 PC on the Cisco
Configuration Unified IP Phone 7970, and 10/100/1000 PC on the Cisco
Unified IP Phone 7971G-GE). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch, configure the port on the
switch to the same speed/duplex as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you must change the SW
Port Configuration option to the same setting.
PC VLAN Allows the phone to interoperate with 3rd party switches that do not
support a voice VLAN. The Admin VLAN ID option must be set
before you can change this option.
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Network Configuration Menu
To Change
Unlock network
1.
configuration options.
Scroll to the SW Port
2.
Configuration option and
then press the Edit softkey.
3. Scroll to the setting that you
want and then press the
Select softkey.
Press the Save softkey.
4.
Unlock network
1.
configuration options.
Scroll to the PC Port
2.
Configuration option and
then press the Edit softkey.
3. Scroll to the setting that you
want and then press the
Select softkey.
Press the Save softkey.
4.
Unlock network
1.
configuration options.
2. Make sure the Admin
VLAN ID option is set.
3. Scroll to the PC VLAN
option, press the Edit
softkey, and then enter a new
PC VLAN setting.
Press the Validate softkey
4.
and then press the Save
softkey.
4-7