Cisco 7975G Software Manual page 65

Chapter 3 Setting Up the Cisco Unified IP Phone
Procedure
Step 1 Push in the footstand adjustment button.
Step 2 Adjust the footstand, so it is flat against the back of the phone.
Step 3 Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand.
The keyholes fit standard phone jack mounts.
Hang the phone on the wall.
Step 4
Figure 3-3
1
Footstand adjustment button—Raises and lowers adjustment plate
2 Wall mounting screw holes
3 Adjustment plate—Raises and lowers phone vertically
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Parts Used in Wall Mounting the Cisco Unified IP Phone
Adjusting the Placement of the Cisco Unified IP Phone
3-11